On 10/19/2011 9:54 AM, Cqtestk4xs@aol.com wrote:
> I've been looking around for a fairly good amount of 75 ohm RG-11
> equivalent to make the phasing harnesses for my stacks.
How much is "a good amount?" If you're buying much, you might consider
buying a full spool of Belden from a broadcast vendor. They make some
very good RG11 cables. Unfortunately, Belden cable is burdened by a
policy of selling only through distributors, most of which have pretty
high markups. Belden 8213 is awfully good. Foam, very low loss. I'm
using it to feed high 80/40 dipoles, and they work well to 6M.
Commscope is another excellent mfr. Just look for a cable with a beefy
copper in both braid and center conductor.
73, Jim K9YC
TowerTalk mailing list