Towertalk
[Top] [All Lists]

Re: [TowerTalk] KLM 13-El 2M Beam - Need Documentation

To: towertalk@contesting.com
Subject: Re: [TowerTalk] KLM 13-El 2M Beam - Need Documentation
From: K8RI <K8RI-on-TowerTalk@tm.net>
Date: Mon, 28 Nov 2011 23:00:05 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
On 11/28/2011 12:40 PM, Jim Brown wrote:
> One of the guys in our local ham club has given me this beam with a
> design that suggests that it was made by KLM.  There are two driven
> elements made of tubing, with a crossover between them and a short
> length of coiled teflon coax as a phasing line. The remaining elements
> are small diameter solid aluminum mounted with feed-thrus to the 22-foot
> boom, which appears to be about  1-inch to 1-1/4 inches.  The antenna is
> in excellent shape.

I have a pair of 14L KLMs but they use 4 driven elements and a single 
coaxial (concentric tubes) balun mounted to the boom. No hairpin or half 
wave coax matching.
I think I have all new insulators too. OTOH I have no idea as to where 
the manuals are, although they are around here...some where.

73

Roger (K8RI)

>
> I'm planning to use it for weak signal work on the lower 500 kHz of the
> band.  I'd like to know its specs, and what, if anything, I need to do
> to optimize it for that end of the band.
>
> 73, Jim K9YC
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>