[Top] [All Lists]

Re: [TowerTalk] Yaesu Rotor Dial Lamp

To: Larry <>
Subject: Re: [TowerTalk] Yaesu Rotor Dial Lamp
From: EZ Rhino <>
Date: Thu, 8 Dec 2011 16:46:10 -0700
List-post: <">>
I have one of these kits.  The kit is fine, works fine, marginally bright 
enough in my opinion...probably not quite as bright as the stock bulb.  Getting 
the kit is the problem...order it and wait 6 months, no response, doesn't 
answer the phone, ignores emails, etc.  


On Dec 8, 2011, at 16:41 , Larry wrote:

IdiomPress makes a small illuminator board for HyGain rotor boxes
which might work. It has 3 LEDs and is intended to sit on top of a
meter with a clear top. It has a rectifier to get the DC voltage for the
LEDs from a 28VAC source in the HyGain units. It was about $11 
for the kit I think. I don't know if it would work for the Yaesu control 
unit or not. Search for "Rotor-EZ".

73, Larry  W6NWS

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>