The engineer at US Tower told me a Home Depot bronze ground clamp on my
galvanized HDX-589 tower would be fine. The clamp wraps around a tower
brace and the #2 copper wire goes into a hole with a lock nut on the back of
the clamp. Copper and zinc never touch each other.
----- Original Message -----
From: "Warrenwolff" <firstname.lastname@example.org>
Sent: Thursday, December 22, 2011 9:40 AM
Subject: [TowerTalk] Tower Legs
> I note the comment about CadWelding to a tower
> leg. I have seen posts here (where else?) on how
> to do it and then, just "don't do it".
> The installer I am using wants to exothermically
> attach my #2 copper to the legs of an AN-HD60
> tower, whose legs are definitely not thin.
> This was in response to my failed attempts to locate
> any "stainless shims" for clamping the #2 to the
> Comments, please.
> Warren; W7WY
> TowerTalk mailing list
TowerTalk mailing list