>I need to replace the attachment for my 160/80 meter 1/4 wave
>sloper (fed at the same
>point, attached to one leg of the tower). I'm currently using an
>connector, but it's in bad shape after 19 years. Suggestions?
I use a Budwig HQ-1 Dipole Center Insulator:
The sloping wire is connected to one side. On the tower side, I
used a short piece of coax braid, and secured it to the tower by
wrapping it around a leg, and then clamping it with a stainless
steel hose clamp.
Dave Hachadorian, K6LL
TowerTalk mailing list