On 1/16/2012 12:24 PM, Steve Hunt wrote:
> If you had 0.3dB loss in a connector I doubt you or the guy at the other
> end would hear the difference. But if you ran 1.5kW through it you'd
> probably smell the difference!
> 100w is a lot of power to dissipate in such a small volume!
> Steve G3TXQ
Never even considered running anything greater than 500 watts through a
PL259, to be honest with you. I know they are rated for higher power,
but I've never considered them as being the right connector for the
TowerTalk mailing list