I'm shunt feeding a 90' aluminum tower for 160-meters. .
I found the 50 ohm tap point on the tower and have the shunt wire
connected to the tower at that point. At the base of the Shunt wire I'm
-Rs = 51 ohms.
-Xs = 344.
-Q = 6
-Ls = 30.1 uH.
Please advise what I need to add to this circuit... such as: a 30uH
inductor? If a 30uH inductor can I easily make one, such as: X turns of #10
with a 3" diameter?
TowerTalk mailing list