The VE6FI one is what I'm familiar with. Mine is similar - 4-30 mhz made
by Sabre (more ex HyGain types). Plus a 6.5 - 40 Collins that just went up
It's pretty unreasonable to try to clear the element with the crane, as
you mention - and unnecessary - a tagline fore and aft will easily keep
the boom of the crane between the elements.
The one thing you need to be aware of - if you place the antenna on top of
the mast (the HyGain was designed to be tilted up in one piece) you will
need to have something in place to allow the rigger to get to the top of
the mast to bolt the antenna on. At least on the HyGain one, the tower is
80 feet and the mast is 100' and has no climbing pegs.
On Wed, Jan 18, 2012 at 4:36 AM, Doug Ronald <firstname.lastname@example.org> wrote:
> > Why would you want this antenna for ham radio? What is the "value
> proposition" or "cost vs benefit"? What is the design goal?
> Answer: Freedom from antenna frequency dependence! I don't care if the gain
> is only equivalent to a 3 element Yagi, there's no tuning to resonance, a
> VSWR that is always less than 2:1, and a proven design the military and FAA
> have used for decades. Esthetically, I really like the looks of this
> I'm not the only amateur with this antenna. VE6FI has a similar one; locate
> a picture here:
> TowerTalk mailing list
TowerTalk mailing list