This appears to bolt to all three legs, which makes it a very nice design.
To: "Richard Thorne" <email@example.com>, "Towertalk"
Subject: Re: [TowerTalk] Swinging Gate Side Mount - Additional Turning
From: "Jim W7RY" <firstname.lastname@example.org>
Reply-to: Jim W7RY <email@example.com>
Date: Sun, 29 Jan 2012 16:22:51 -0800
I don't like the swinging gate from IIX. Here's why. The mounts only clamps
to ONE leg of the tower. You have to tighten the U bolts too tight to get
the mount not to turn. This puts way too much pressure onto the leg.
I like a design that I found here:
http://www.arraysolutions.com/Products/sidemountusersguide1.htm It Uses
angle iron to connect to two legs of the tower. There is no possibility of
slippage so you don't have to over tighten the U bolts.
TowerTalk mailing list