[Top] [All Lists]

Re: [TowerTalk] Aluminum Tubing Grease

Subject: Re: [TowerTalk] Aluminum Tubing Grease
Date: Wed, 1 Feb 2012 12:38:43 -0500 (EST)
List-post: <">>
If you're cheap like me....I use a small brush and when I get to  that last 
30%, I just cut the top off with a utility knife and dab the brush  into 
it.  As for cleanup...Fast Orange works great on your hands to get the  stuff 
By the way, you don't have to put a lot on.  Just a thin layer  will do the 
trick.  I'm in the process of putting 20+ HF antennas together  and am 
quite familiar with NoAlOx....very familiar!
In a message dated 2/1/2012 5:20:10 P.M. Greenwich Standard Time, writes:

It was really hard to get the last 30% of the 
Noalox out of the 4oz Home  Depot squeeze bottles.  We used 5 bottles for 
two 40m Moxon  beams.

All are messy.  I wear a nitrile glove to spread it evenly  by hand on 
the joint.


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>