I'm going to lower a 90' Heights aluminum fold over tower with my car
tomorrow evening. I've done this before without destroying the tower so
hopefully I can have another successful lowering!
My question is what is the best height on the tower to attach my Nylon
Strap for lowering the tower?
A few thoughts:
1) The 90' tower folds over at ground level and has a 36" wide base.
2) In the past, I attached my nylon strap around the tower at aprx. the
35' level and then attach a 1/4" steel cable to the nylon strap and raise and
lower the tower with my car.
3) I keep the top of the tower 13' off of the ground so there's room to
attach my 24' boom Yagi to the top of the tower. Keeping the top of the
tower 13' off of the ground makes it easier to lower and raise the tower with
vehicle than if the top of tower was on or near the ground. That said,
with the top of the tower 13' off of the ground it's still quite touchy
raising and lower the tower as only as a small movement in the vehicle makes a
big change in the tower.
So I'm looking for the best strap height to lower the tower and the best
strap height for raising the tower. After using the 35' height before... I
don't think that one height is the ideal height for raising and lowering
the tower. Since it's easy to locate the nylon strap anywhere on the tower
I'm looking for the best height for lowering and best height for raising.
All thoughts appreciated!
TowerTalk mailing list