Andrew has been owned by Comscope for many years now. AVA5-50 replaced
LDF5-50 which is 50 ohm 7/8" nominal diameter Heliax. LDF4-50 is still
available and has been on the market for at least 15+ years.
The AVA line of Helix (which is a trademark of Andrew/Comscope) is a less
dense foam and the velocity factor is 91% and has less loss. AVA stands for
"virtual air". It still has a white foam dielectric but is much less
"visible" at RF. Closer to air dielectric that to foam dielectric.
In my profession, it seems like the AVA line of cable is more delicate that
the LDF line. I sweep thousands of feet of this a year after it's mounted on
the tower and have found some pieces that don't meet specifications for
return loss. As long as you don't bump it during installation, it's fine.
But don't let it bang into the tower in the wind and certainly DO NOT STEP
From: "Jim Miller" <firstname.lastname@example.org>
Sent: Sunday, February 12, 2012 5:13 PM
Subject: Re: [TowerTalk] Andrews Heliax Conx
> I'm just in the planning stages and not ready to buy yet. Perhaps I should
> just let the Commscope/Andrew dust settle. Their website is a bit of a
> Anyone know if the AVAS line is replacing the heliax line?
> Which line of connectors is the likely survivor?
> jim ab3cv
> TowerTalk mailing list
TowerTalk mailing list