[Top] [All Lists]

Re: [TowerTalk] coaxial for loops inside shack

To: <>
Subject: Re: [TowerTalk] coaxial for loops inside shack
From: "Jorge Diez - CX6VM" <>
Date: Wed, 22 Feb 2012 08:52:58 -0200
List-post: <">>
Hello Jim,

YES, the setup is for Multi Single, Multi Two and SO2R, so I need something
very good.


-----Mensaje original-----
[] En nombre de Jim Brown
Enviado el: Miércoles, 22 de Febrero de 2012 05:15 a.m.
Asunto: Re: [TowerTalk] coaxial for loops inside shack

On 2/21/2012 2:27 PM, Gene Fuller wrote:
> How much power/SWR will RG-8X  handle

POWER is not the only issue. SHIELDING can matter FAR more than power if 
you are doing a multi-transmitter operation.  Jorge -- are you doing 
more than one transmitter -- SO2R or multi-two?  If you are, using 
bigger coax with a very good shield can reduce interference between 
stations. All of my feedlines are either Heliax, CATV hard line, Belden 
8213 (RG11), Belden 8237 (RG8), or a Commscope cable that's slightly 
better than LMR400.

73, Jim K9YC


TowerTalk mailing list
Se certifico que el correo no contiene virus.
Comprobada por AVG -
Version: 2012.0.1913 / Base de datos de virus: 2113/4823 - Fecha de la
version: 21/02/2012


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>