On 4/1/2012 8:03 PM, firstname.lastname@example.org wrote:
> Dave is looking for answers for his soon to be moved/bracketed tower:
> Hi guys, I'm in the process of relocating my 35' freestanding Rohn 25G tower
> after 8.5 years on the air.
> <more snip>
> 3. The specs also state that the base has to be the same 2x2x4 feet of
> concrete that was spec'ed for self-supporting and guyed towers.
> <end snip>
> Granted, Dave probably has the tower down by now AND I'm hoping that the
> "2x2x4 foot base" was a mistake when Dave typed it.
> The Rohn specs for SELF SUPPORTING 25G is 4x4x4 feet......... I can't believe
> no one else caught this. A base 2x2x4 feet, self supporting, would be just a
> tad wiggly, unless of course it was surrounded by a cacoon of concrete
> another 2 foot thick.
25G doesn't go very high at all self supporting so it's not going to
take a large base. At 40 feet it's rated at less than 2 sq ft of antenna.
AT 90 MPH it'll support 4.4 sq ft at 35 feet. ROHN's specs really do
call for 4 X 4 X 4' of concrete on the 25G
> Other than this, good luck with your project........ AND always do what the
> tower mfg says..... (was/isn't that what someone on this list always says?
> 73 es GDDX
> K9WN Jake
> TowerTalk mailing list
TowerTalk mailing list