I got some 6" bulkhead connectors from max-gain systems. They look
nice enough and seem to work ok so far. Also some of their silver
plated connectors but I haven't tried those yet.
On Mon, Apr 9, 2012 at 9:57 AM, Pete Smith N4ZR <firstname.lastname@example.org> wrote:
> You might call The Rf Connection and talk to Joel. I have always found
> him to be forthright about the quality of the connectors he sells, while
> acknowledging that he does sell some cheap junk because that's what many
> hams demand. Also, the quality differentiation is pretty evident on his
> 73, Pete N4ZR
> The World Contest Station Database, updated daily at www.conteststations.com
> The Reverse Beacon Network at http://reversebeacon.net, blog at
> spots at telnet.reversebeacon.net, port 7000 and
> arcluster.reversebeacon.net, port 7000
> On 4/9/2012 10:52 AM, John Becker wrote:
>> There has been discussion recently about the quality of UHF connectors
>> from manufacturers other than Amphenol. The consensus has been that they
>> should be avoided.
>> I'm replacing some feedlines, and was considering using UHF bulkhead
>> connectors to bring them through the wall. Presently, they just go
>> through with no connector. The problem is that AFAIK Amphenol only makes
>> a 2" long UHF bulkhead connector and I would need 6".
>> These are readily available, but the manufacturer seems to be unknown.
>> For instance, I've seen them at Dayton from this dealer:
>> Any thoughts on this subject? Thanks!
>> John, K9MM
>> TowerTalk mailing list
> TowerTalk mailing list
TowerTalk mailing list