[Top] [All Lists]

Re: [TowerTalk] Baluns for RX antennas

Subject: Re: [TowerTalk] Baluns for RX antennas
From: Craig Smith <>
Date: Mon, 23 Apr 2012 13:34:19 -0600
List-post: <">>
I leave the ends of the coax open and measure across the choke with the short 
test leads attached to the shield at either end.  Just like you would measure 
any inductor.   The AIM will then plot Impedance, Reactance and Resistance as a 
function of frequency.

73  Craig  AC0DS

So you short shield and center together on each end, and then measure 
across the whole assembly with some jumpers from Coax on AIM to the UUT?

Or just the center, or the shield?


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>