On 4/27/2012 8:24 PM, Wilson Lamb wrote:
> How much torque is involved
> I have mounted bike sprockets on V-belt pulleys with bolts, so if you can
> find anything with a 2" bore you are started.
The most difficult part there is getting them aligned to the OD of the
sprockets runs true, but in general this approach is much cheaper than
the commercial sprockets with a 2" bore.
73
Roger (K8RI)
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|