[Top] [All Lists]

Re: [TowerTalk] Antenna modelling program

To: <>
Subject: Re: [TowerTalk] Antenna modelling program
From: <>
Date: Fri, 4 May 2012 01:24:16 -0000
List-post: <">>
EZNEC seems to give accurate results and I like the software, however it is 
difficult to design yagis without some computer assistance.  It is too bad 
that there are no plans to add an optimizer to EZNEC.  I have never tried 
4nec2 and I was not aware that it has an optimizer until this post.  I think 
I may give it a try!

John KK9A
Subject:Re: [TowerTalk] Antenna modelling program
From:Jim Brown <>
Date:Thu, 03 May 2012 12:35:55 -0700

On 5/3/2012 12:07 PM, Jim Lux wrote:
> 4nec2 is what I use.. a nice graphical front end to the NEC2 engine.  If
> you have a copy of NEC4, it will drive it too.  (and it's free)

And it has an optimizer routine, which EZNEC does not, and at Dayton a
few years ago, W7EL said he had no intention to write one.

73, Jim K9YC 


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>