[Top] [All Lists]

Re: [TowerTalk] Antenna modeling program

To: "'Jim Lux'" <>, <>
Subject: Re: [TowerTalk] Antenna modeling program
From: "Mike Baker" <>
Date: Thu, 3 May 2012 19:40:26 -0700
List-post: <">>
BUT, the cost for the license for NEC4 is quite expensive. Even as a student
is isn't exactly cheap!

Mike Baker  K7DD
All QSO's are uploaded to LOTW and EQSL.

-----Original Message-----
[] On Behalf Of Jim Lux
Sent: Thursday, May 03, 2012 12:08 PM
Subject: Re: [TowerTalk] Antenna modelling program

On 5/3/12 10:37 AM, Dave Sublette wrote:
> Hello to the group,
> I just discovered that the program I use to model antennas is defunct.
> It is/was Antenna Model.  What are the programs that are being used 
> successfully by this group?
4nec2 is what I use.. a nice graphical front end to the NEC2 engine.  If you
have a copy of NEC4, it will drive it too.  (and it's free)

EZNEC is also popular.  Lots of sample models out there, and it has more
"amateur specific" features, I think.

TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>