That's a good question..worth a phone call..its just to see a US company inter
the market!
Bob Gibson W5RG
From: Doug Renwick <ve5ra@sasktel.net>
To: 'Jon Pearl - W4ABC' <jonpearl@tampabay.rr.com>; 'Bob Gibson'
<w5rg@yahoo.com>
Cc: TowerTalk@contesting.com
Sent: Saturday, May 5, 2012 8:51 PM
Subject: RE: [TowerTalk] WHICH ROTOR TO USE?
My observations of this rotor:
1. That's a pretty small mast clamp. You would need a different mast clamp
for every different OD mast.
2. How is the flange attached to the out put shaft? That could be the weak
link.
3. Looks like it needs 4 hands to install up on the tower.
Doug
Logic, reason and science don't define everything in this world.
>-----Original Message-----
>
>I was just going to make that suggestion, Bob...
>
>http://www.cytorq.com/
>
>
>
>73,
>
>
>Jon Pearl - W4ABC
>www.w4abc.com
>
>
>On 5/5/2012 2:15 PM, Bob Gibson wrote:
>> There is a new rotor on the market now that looks pretty good..check
>out..oytorq.com..I use a orion 2800 and a green heron to turn a 4 ele 40
and a 4 ele
>steppir..no problem here in fl. 73s Bob
>>
>>
>> Bob Gibson W5RG
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|