[Top] [All Lists]


To: Doug Renwick <>, 'Jon Pearl - W4ABC' <>
Subject: Re: [TowerTalk] WHICH ROTOR TO USE?
From: Bob Gibson <>
Reply-to: Bob Gibson <>
Date: Sat, 5 May 2012 19:16:21 -0700 (PDT)
List-post: <">>
That's a good question..worth a phone call..its just to see a US company inter 
the market!

Bob Gibson W5RG

From: Doug Renwick <>
To: 'Jon Pearl - W4ABC' <>; 'Bob Gibson' 
Sent: Saturday, May 5, 2012 8:51 PM
Subject: RE: [TowerTalk] WHICH ROTOR TO USE?

My observations of this rotor:

1.  That's a pretty small mast clamp.  You would need a different mast clamp
for every different OD mast.

2.  How is the flange attached to the out put shaft?  That could be the weak

3.  Looks like it needs 4 hands to install up on the tower.


Logic, reason and science don't define everything in this world. 

>-----Original Message-----
>I was just going to make that suggestion, Bob...
>Jon Pearl - W4ABC
>On 5/5/2012 2:15 PM, Bob Gibson wrote:
>> There is a new rotor on the market now that looks pretty good..check
> use a orion 2800 and a green heron to turn a 4 ele 40
and a 4 ele
> problem here in fl. 73s Bob
>> Bob Gibson W5RG

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>