To tell you the truth I don't know if it is truly a HyGain or not. I was told
it was but the person I bought it from had it sitting in their yard for a few
years so he could have been wrong. Is there any way to tell? all of the labels
have long since worn off.
Sent from my iPad
And YES it's cool!
On May 28, 2012, at 5:25 PM, Greg <email@example.com> wrote:
> Are you sure its a hygain? I have the hg70hd and the manual but it uses the
> rear cage with the ears welded....no T plate.
> Maybe its a us tower model?
> On May 28, 2012 4:30 PM, "Marv Shelton" <firstname.lastname@example.org> wrote:
> I just purchased a used HG-70HD 70 ft. crankup tower by
> Hygain. My problem is that the manual I received online is not 100%
> identical to the tower that I have. Specifically, the base mounting is
> different. In the manual, the tower base tabs are mated to matching tabs
> welded to the ends of rebar that form the base foundation cage. My tower
> came with a "T" Shaped mounting base with holes in it that apparently are
> use by a threaded rod foundation base.
> Even though I will have to have a foundation base made (the cost of a new
> one plus shipping made the decision very easy). I would like to have it made
> to utilize the "T" shaped base that I have. I believe the reason for this
> base design is to allow it to be mounted on screws on threaded rods, which
> would allow the antenna to be plumbed easily.
> Does anyone have the manual, plans and drawings for this version of the
> I'm also looking to replace the cables and other hardware throughout the
> tower. They are structurally sound, but I'd like to start with new hardware.
> If someone has a parts list that would be helpful as well.
> Thanks in advance
> Marv WA2BFW
> TowerTalk mailing list
TowerTalk mailing list