If the Rohn 25 was in decent condition (had some galvanizing in the joint
section), gravity and the bolted connections will provide adequate
connection between sections. I wouldn't worry about it.
geo - n4ua
On Mon, Jun 25, 2012 at 6:26 PM, Gregg Seidl <email@example.com> wrote:
> I have a 60 foot stick of Rohn 25 insulated from ground. I plan on using
> an Array Solutions AS-80 tuner to resonate the vertical on 75/80 and 160. I
> know I need to get slightly more height to make it work correctly so I'm
> planning on using a TV type mast in the top "pointy" section to get more
> height. My question is should I run a peice of 12 or 14 guage wire from the
> mast all the way to the tuner and bond it to each tower section? my worry
> is that the sections and top mast may not make a good connection. Any ideas
> would be great.
> Gregg K9KL
> TowerTalk mailing list
TowerTalk mailing list