Towertalk
[Top] [All Lists]

Re: [TowerTalk] IP Enabled SWR Meter

To: "'Paul Smith'" <nd4x@hotmail.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] IP Enabled SWR Meter
From: "Dick Green WC1M" <wc1m73@gmail.com>
Date: Sat, 30 Jun 2012 16:02:58 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Paul,

Try Googling "RF Power Monitor Ethernet".

These two commercial offerings look good (they appear to be the same), but
also look expensive (no prices shown):

http://www.aksolutions.com/Pages/AK883XAIS/AK883X.html

http://www.dbspectra.com/resources/095623-000_DSPM.pdf

This company has a ham-oriented solution that might work for you:

http://www.glentekcorp.com/

They don't offer the power/SWR monitor itself -- they have electronics that
connect to a Bird 43. 

Another option would be to use a meter that has an RS-232 interface and
connect an Ethernet-to-serial adapter to it. I've not used an
Ethernet-to-serial adapter, so I don't know what's involved to connect to it
and don't know the cost. As for power/SWR meters with RS-232, the LP-100A
from N8LP (Telepost, Inc.) is an excellent choice if accuracy is important.
If that's too expensive for you, the Elecraft W2 has a built-in serial port
and provides acceptable accuracy.

Hope this helps.

73, Dick WC1M

> -----Original Message-----
> From: Paul Smith [mailto:nd4x@hotmail.com]
> Sent: Saturday, June 30, 2012 2:31 PM
> To: towertalk@contesting.com
> Subject: [TowerTalk] IP Enabled SWR Meter
> 
> 
> 
> 
> 
> Anyone know of an Power/SWR meter with an ethernet interface on it that
> would enable you to remotely monitor a VHF radio over the internet?  We
> have a router on-site with private IPs that could be assigned to the
> interface.   Thanks - ND4X

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>