Towertalk
[Top] [All Lists]

Re: [TowerTalk] Sources of Coax Relays

To: TowerTalk <TowerTalk@contesting.com>
Subject: Re: [TowerTalk] Sources of Coax Relays
From: Pete Smith N4ZR <n4zr@contesting.com>
Date: Thu, 12 Jul 2012 11:34:36 -0400
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I've used dozens of $2 PC board power relays over the years in various 
antenna switching applications, and have never had a failure at >1300 
watts and SWRs from 1:1 up to over 3:1.  W2VJN reported similar, much 
more rigorously tested results at TopTen Devices.  I don't see any 
reason to gild this lily further.

73, Pete N4ZR
The World Contest Station Database, at www.conteststations.com
The Reverse Beacon Network at http://reversebeacon.net, blog at 
reversebeacon.blogspot.com,
spots at telnet.reversebeacon.net, port 7000 and
arcluster.reversebeacon.net, port 7000

On 7/12/2012 9:20 AM, Jim Lux wrote:
> On 7/11/12 8:58 PM, Jim Brown wrote:
>> I'm looking for good quality coax relays for use at the 1,5kW level.
>> Some will be used only on 160M, most will be used on the HF bands. I may
>> have a use for a few at the 200W level on 2M.  Some will be used for 6-
>> or 8-position switching to radios, while others will be used with very
>> different logic.  I'm hoping that I can do everything with 12VDC or
>> 24VDC. Nearly all will be used indoors, but I need at least one or two
>> that are easy to weatherproof.
>>
>> I've got a couple of the Array Solutions products, but I'm not thrilled
>> with the relays that are used.
>>
> What about those doesn't thrill you?
>
>
> I assume you're looking for something reasonably inexpensive, that is,
> you're looking to repurpose a conventional DC-60Hz kind of power relay
> to RF.
>
> There's been quite a lot of discussion on this list (and others) over
> the years about which relays seem to work better or worse.  Complicating
> this is that a model number that worked 10 years ago might not work
> today: it will have the same pinout, contact configuration, and 60 Hz
> performance, but the RF properties could be quite different.
>
> It sounds like you're going to need a lot of relays in the long run
> (dozens), so maybe the thing to do is to build some little PC boards
> that hold one relay and do some testing?
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>


_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>