On 7/14/2012 6:18 PM, n8de@thepoint.net wrote:
> That's the best for 'telescoping' segments, however, TIP segments are
> usually 0.038 as they don't 'support' another segment.
I have two Force 12s. A C19XR and an older WARC-7
The tips on the C19 are 0.058 and on the warc 7 slightly over 0.043
I don't have access to any of the inner sections.
73
Roger (K8RI)
>
> 73
> Don
> N8DE
>
> Quoting K7LXC@aol.com:
>
>> Howdy -
>>
>> I'm fixing a couple of broken F12 elements and need to know what the
>> typical wall thickness is for normal aluminum antenna elements. It seems to
>> me that 0.058" is a number I've seen before but want to confirm that. Tnx.
>>
>> Cheers,
>> Steve K7LXC
>> _______________________________________________
>>
>>
>>
>> _______________________________________________
>> TowerTalk mailing list
>> TowerTalk@contesting.com
>> http://lists.contesting.com/mailman/listinfo/towertalk
>>
>
>
>
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
>
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|