A couple of people have suggested the Slipp-Nott. Before you try one, I
would suggest you read my tale of woe with a Slipp-Nott which I posted
on this list in April:
http://lists.contesting.com/pipermail/towertalk/2012-April/129529.html
With respect to the suggestion that a smooth galvanized mast under
pressure can become slippery, that may have been part of my problem too.
I never had a slipping problem until I replaced a mast which was rough
surfaced due to the presence of rust with a shiny new one.
73,
John, K9MM
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|