Towertalk
[Top] [All Lists]

Re: [TowerTalk] IARU Team Stations

To: Mark Pride <mpridesti@yahoo.com>
Subject: Re: [TowerTalk] IARU Team Stations
From: "Richard (Rick) Karlquist" <richard@karlquist.com>
Date: Sat, 28 Jul 2012 22:31:20 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Using steel helps, but the wire still forms a catenary
that makes it behave as if it had some stretch.

Rick N6RK

On 7/28/2012 9:23 PM, Mark Pride wrote:
> Rick,
> The link from the top of the derrick to the tower (lifting component) is
> a steel cable so practically no stretch here.
> Regards,
>
> Mark, K1RX
> *From:* Richard (Rick) Karlquist <richard@karlquist.com>
> *To:* Hector Garcia XE2K <j_hector_garcia@sbcglobal.net>
> *Cc:* Bud Kozloff <W1NSK@Hotmail.com>; towertalk@contesting.com
> *Sent:* Saturday, July 28, 2012 11:18 PM
> *Subject:* Re: [TowerTalk] IARU Team Stations
>
> This is obviously a successful set up, but one thing
> that I don't like is that the derrick is rigidly coupled
> to the tower.  I tried this years ago and discovered that
> if the rope between the tower and derrick has any stretch
> in it, you can end up with a lot of strain on the
> connection between the pieces.  What I do instead is
> have independent pivots for the tower and derrick.
> Then the ropes are non critical.
>
> Rick N6RK
>
> On 7/28/2012 1:03 PM, Hector Garcia XE2K wrote:
>  > take a look
>  >
> http://s1266.photobucket.com/albums/jj529/wrtc2014/WRTC%20Station%20Test%202012/K1RX%20Photos/
>  >
>  >
>  >
>  > also facebook
>  >
>  > http://www.facebook.com/wrtc2014
>  >
>  >
>  >  J.Hector Garcia  XE2K / AD6D
>  > Mexicali B.C  DM22fp
>  > P.O.Box 73
>  > El Centro CA 92244-0073
>  > http://xe2k.net
>  >
>  >
>  >
>  >
>  >
>  >
>  >
>  > ________________________________
>  > From: Bud Kozloff <W1NSK@Hotmail.com <mailto:W1NSK@Hotmail.com>>
>  > To: towertalk@contesting.com <mailto:towertalk@contesting.com>
>  > Sent: Sat, July 28, 2012 12:52:36 PM
>  > Subject: [TowerTalk] IARU Team Stations
>  >
>  > Thinking of a "temporary" 35ft 25G Setup w/A4S on top similar to what
>  > they are doing for the 2014 temporary team stations.
>  > How are they installing the towers? Actually pouring foundations?
>  > Putting a 10ft section in a 5ft hole and digging it out afterwards?
>  > How are they installing the guys?  Any info would be appreciated.
>  >
>  >
>  > _______________________________________________
>  >
>  >
>  >
>  > _______________________________________________
>  > TowerTalk mailing list
>  > TowerTalk@contesting.com <mailto:TowerTalk@contesting.com>
>  > http://lists.contesting.com/mailman/listinfo/towertalk
>  > _______________________________________________
>  >
>  >
>  >
>  > _______________________________________________
>  > TowerTalk mailing list
>  > TowerTalk@contesting.com <mailto:TowerTalk@contesting.com>
>  > http://lists.contesting.com/mailman/listinfo/towertalk
>  >
>  >
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com <mailto:TowerTalk@contesting.com>
> http://lists.contesting.com/mailman/listinfo/towertalk
>
>
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>