Phillystran compresses a lot, so I use a slightly smaller cable clamp than
the actual cable size. If I recall correctly, HPTG-2100I is .22 diameter
and I use 3/16 clamps. HPTG-4000I is .30 diameter and I use 1/4 clamps. I
only use cable clamps on boom trusses, where Big Grips are not practical.
Subject: [TowerTalk] u clamp sizes for phyllistran?
From: Brian Alsop <email@example.com>
Date: Thu, 30 Aug 2012 11:50:43 +0000
I have various pieces op phyllistrad and wish to use it for boom support
and other purposes.
Need to know the proper size U clamps for:
I haven't had any luck determining the dimensions of the various U
clamps. For example just what dimension is 3/16 on a 3/16" clamp?
Yes I know about big grips. There appear to be none for T1200.
73 de Brian/K3KO
TowerTalk mailing list