[Top] [All Lists]

[TowerTalk] Most reliable way to test coax?

To: towertalk <>
Subject: [TowerTalk] Most reliable way to test coax?
From: Wilson Lamb <>
Date: Fri, 14 Sep 2012 14:01:48 -0400 (EDT)
List-post: <">>

After all the recent talk about losses and switchboxes, you know how to test by 
simply leaving the far end open and measuring SWR. 

Use your xcvr as a source and test at your operating freq. 

The dummy load is a fine power test, but not a good loss test, unless you 
carefully measure power at both ends 



TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>