|To:||Dick Dievendorff <firstname.lastname@example.org>|
|Subject:||Re: [TowerTalk] Winch recommendation sought|
|From:||Jon Pearl - W4ABC <email@example.com>|
|Date:||Sun, 16 Sep 2012 14:47:00 -0400|
Hi Dick.The first thing that comes to mind when I think of hauling varying or longer lengths of rope than the typical winch or hoist spool can handle would be that of a capstan winch. I did a quick search for the term 'capstan winch' and came up with a lot of sources but the bottom of the following page gives some insight into some possible capabilities and uses by just one manufacturer: http://www.powerwinch.com/powerwinch/PowerwinchCatalog.pdf
Of course, beyond what's captured in the catalog above there are also several portable 4 cycle powered versions listed on the web, many of which can be attached to a hitch receiver, tree or utility pole. There are many rescue type pulleys that are more than capable of doing the job at hand at the top of the tower http://www.amazon.com/s/ref=nb_sb_noss_1?url=search-alias%3Dsporting&field-keywords=Rescue+Pulley# They can be 'attached' at any point without having to thread the entire length of line through the pulley and are way overrated for what you're looking to haul up the tower.
Maybe Steve, K7LXC will chime in here with some suggestions on what might work for you in the way of a product that will give you some value for intermittent use over a period of years.
73, Jon Pearl - W4ABC www.w4abc.com On 9/16/2012 1:04 PM, Dick Dievendorff wrote:
I need to install a heavy ring rotator up at about 60' and the motor weighs more than I can lift easily with a rope, even with a 2:1 mechanical advantage. I could go to 4:1 with a lot more rope.I'm considering an electric winch that I could temporarily attach near the top of the tower and have it pull heavy stuff up. Maybe up to a couple hundred pounds. Most of the winches I find don't have much cable or room for much cable. I think I want about 75'. Do any of my Tower Talk colleagues have a recommendation for this?At someone else's station I used a hand crank winch to pull up a heavy piece of rotator to guys up on the tower. That's a good second choice, a manual crank attached at the base of the tower. But then I'd need about 150' of cable and room on the spool for at least half that.Dick, K6KR
_______________________________________________ _______________________________________________ TowerTalk mailing list TowerTalk@contesting.com http://lists.contesting.com/mailman/listinfo/towertalk
|<Prev in Thread]||Current Thread||[Next in Thread>|
|Previous by Date:||Re: [TowerTalk] AN Wireless HD tower installation advice needed, K7LXC|
|Next by Date:||Re: [TowerTalk] Turned reflector?, Jim Lux|
|Previous by Thread:||[TowerTalk] Winch recommendation sought, Dick Dievendorff|
|Next by Thread:||[TowerTalk] Turned reflector?, k2qmf|
|Indexes:||[Date] [Thread] [Top] [All Lists]|