At 12:56 AM 9/29/2012, you wrote:
I am trying to locate any information for pre-1995 Heights Aluminum
Free Standing Towers. Catalog or Datasheet scans would be appreciated.
How old and what type tower do you mean? Pre-1995 could cover a lot
of years. My fixed Heights tower was installed at my house in 1976,
and I bought it used!
I have several catalog/datasheets from that era. I can't do a good
job of scanning since the data sheets are 11x17 inches. I can scan
the individual pages probably with some overlap or xerox them and
My 80ft tower consists of three lowest sections of type HAC-26
(0.25inch wall tubing), followed by two AC-26, one AJ-26, two AC-22,
one AJ-22, one AT-18.
That tower is listed as 26sqft. free standing. I added two sets of
loose phillystran guys after a 100yr storm in 1978. It is still standing.
A different datasheet which I think is somewhat later no longer shows
the HAC-26. Instead the 25sqft starts with two AC-30 followed by an
AJ-30 which transitions to AC-26. I believe the heavy duty HAC-26
replaced the AC-30.
I have several other pages describing a line of fold-over Heights Al
towers. I have never seen these.
I also have a catalog of Al towers from Universal Towers of Warren,
MI. Heights was in Almont, MI. I have always wondered about the
history of these two companies. The products look very similar.
The current Heights is in FL. They give a little history.
I see they now also sell telescoping towers. If that is what you are
seeking, I can't help.
TowerTalk mailing list