[Top] [All Lists]

Re: [TowerTalk] Winch needed

To: towertalk <>
Subject: Re: [TowerTalk] Winch needed
From: Steve Maki <>
Date: Sun, 30 Sep 2012 00:28:56 -0400
List-post: <">>
On 9/30/2012 12:18 AM, K8RI wrote:

On 9/29/2012 11:19 PM, Steve Maki wrote:
For light tower work (up to 1000 lbs load) most crews use capstan rope
hoists (catheads). After getting used to one, you will never consider
anything else.

Unfortunately I do like the capstan, but it is completely unsuitable for
solo work. IE, I need to be able to operate the winch alone, taking
masts and sections to the top of the tower, guiding things into
position, and then lowering them into place, yet still holding onto them
while I climb up the back side of the tower to bolt things in place. IE,
one person on the rope to the capstan and one or two for lateral
movement of the parts works great, but I don't have that kind of help.
There are several knowledgeable hams in the area, but scheduling is a

I can use the occasional gofer on the ground, but generally will be
working with untrained (and likely unknowing) helpers.  That means
planning ahead and depending on the equipment while practicing safe

The capstan is great if I have someone on the tower that knows what they
are doing, or some one on the ropes to raise and lower parts while
controlling their position.  I'm not willing to depend on inexperienced
rope handlers to the capstan or positioning while I work the tower. Also
with me working the tower, I've still not built enough stamina for more
than about an hours worth of work.  I have done this with a hand cranked
winch including the placement of tower sections, but I'd like to
minimize the work required.  To stay out from under things the hand
cranked winch requires it be mounted away from the tower and that means
building a mount that won't pull loose, or take up a bunch of space in
the yard.

In either case I will not be working under anything being raised or
lowered, nor will I let anyone else do it.

The heaviest parts will be less than 150#, hence I figure a winch with
1000# capacity should have plenty of safety factor.

When climbing you have to always remember that people make mistakes and
equipment breaks. So the simplest, mundane things can kill you when
doing tower work. You have to know what you are doing, the people on the
ground have to know what they are doing and you prepare yourself to
handle anything that might go wrong.  You CAN NOT eliminate the danger
but you can minimize it and minimize your susceptibility to things that
do go wrong. One thing to never forget. "Tower work is Dangerous!"

I see.

Well, my advice is to not try to do it all alone, from the sound of it.

-Steve K8LX


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>