Thanks for the replies gentlemen. I am going to order connectors. In the
meantime, I'll get some DC to pins 4-5 with the rotor on the bench and see
if it turns OK.
Seems like I rarely have problems that are obvious like a severed wire or
busted gears or a blown diode. Every solution turns out to be the least
obvious and cannot be diagnosed easily.
On Tue, Oct 9, 2012 at 7:28 AM, Doug Scribner <firstname.lastname@example.org>wrote:
> Yaesu connectors here...
> Doug - K1ZO
> ----- Original Message ----- From: "Mark Adams" <email@example.com>
> To: <firstname.lastname@example.org>
> Sent: Monday, October 08, 2012 11:13 PM
> Subject: [TowerTalk] Yaesu 800DXA Followup
> Hi Gang,
>> In July I asked for help with my rotor issues and my initial notes are
>> below. Today I finally lowered the tower, removed the mast and stack to see
>> if anything was binding.
TowerTalk mailing list