[Top] [All Lists]

Re: [TowerTalk] Why galvanized crank up cables instead of stainless?

Subject: Re: [TowerTalk] Why galvanized crank up cables instead of stainless?
Date: Tue, 9 Oct 2012 10:27:46 -0400 (EDT)
List-post: <">>
t/>  Having just replaced my crank up cables (in case they  migh
be rusted internally), I am wondering why stainless steel
cables  aren't used.  It would seem that they would avoid
the latent rust  issue.  I realize that they are not as strong,
but they could simply be  sized appropriately.  Is it the
case that they may still rust, just more  slowly?  Would
they somehow wear out and break internally?  It  would be
great to merely have to inspect the cables for obvious  broken
strands and never have to replace them on a preventative basis.
Can  someone explain this?  Don't airplanes use SS cables?
    Sure, but they don't go thru the forces and cycles  of crank-up cables. 
    IMO there are 2 factors. One is cost since  everything is determined by 
it. And the second is the fact that worked SS cables  under load will gall. 
That is, pieces of the material will be deposited on other  strands and 
eventually you have a hard spot in the cable. This might be  prevented by 
REGULAR cable lubrication but I don't think it's worth the  potential problem. 
    SS nuts and bolts will also gall. That's why you  have to use some sort 
of non-seize on the threads.
Steve    K7LXC

TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>