I have no experience at all. But, I would think securing a piece of teflon or
delrin to the tower would be a better way of accomplishing your goals. Bending
the tower supports doesn't seem like the safest idea.
> Date: Thu, 18 Oct 2012 11:31:57 -0700
> From: jj_2_woo@yahoo.com
> To: towertalk@contesting.com
> CC: richard@karlquist.com
> Subject: Re: [TowerTalk] Crank up tower bracing rubbing against cable
>
> Hi All,
>
> Thank you for the replies. Some of you replied to me in private. Unless I'm
> told otherwise I plan to bend the Z bracing a bit to eliminate the
> interference. I'm not sure yet on how to do that. I do have a sledgehammer.
> Maybe I can take a rebar and hammer the rebar against the center of the Z
> brace. The steel used in my tower is very soft and it bends easily. I will
> give it a try and let you know how it turned out.
>
>
> Best Regards,
> Jonathan Woo, W6GX
> (970) 646-1711
> _______________________________________________
>
>
>
> _______________________________________________
> TowerTalk mailing list
> TowerTalk@contesting.com
> http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|