[Top] [All Lists]

Re: [TowerTalk] 43 feet pole for vertical

Subject: Re: [TowerTalk] 43 feet pole for vertical
From: K8RI <>
Date: Thu, 01 Nov 2012 03:35:18 -0400
List-post: <">>
On 10/31/2012 11:00 PM, Hans Hammarquist wrote:
I was wondering if someone has experience with a 43 foot vertical, mounted on 
top of a

tower. I used one before on top of my roof, but that one was supported with simple guy wires.

Needless to say that is not easy to do if I put it on top of my tower (85 feet tall).

Any suggestion? Maybe it is a very stupid idea?

Guying at 80 feet is almost as simple as guying when on the roof. I assume the tower is solid so use the same anchor points on the vertical as you would on the roof. It's just the ground guy anchor points have to be farther out.

It only takes some simple trig to calculate the length of the guys assuming the yard is farily close to level. Use single or doubly braid poly. 1/8" is strong enough to anchor about 3/4 the way up the antenna.

If the tower is 80 feet and the antenna is 43 then 2/3rds of 43 is roughly 28.6 feet (give or take a foot or two) So the height is 80 + 28.8 is 108 feet. If the distance from the tower to the guy anchor is 80 feet then sqrt(108^2 + 80^2) and I don't have a calculator in there to run that last square root.

I'd use double braided poly on the vertical and probably Phyllistran on the tower. However I think the 43 foot vertical is going to need radials so I'd use steel for those. I've done that with a 40 tower and 33 foot vertical and it worked just fine. I only used 4 radials but was pleased with the results. Course that was back in the late 60's until about 1980.


Roger (K8RI)

Hans - N2JFS

TowerTalk mailing list


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>