Interesting data, how long were the seven radials?
To: "'Towertalk'" <email@example.com>
Subject:Re: [TowerTalk] ground rod depth problem due to rocky
soil -- solutions?
From: "K1TTT" <K1TTT@ARRL.NET>
Date: Fri, 16 Nov 2012 14:46:47 +0000
I plugged that into my lightning modeling software... if I put 7 radial
wires(NO rods) 1" in diameter (a bit smaller surface area than 2"
bury it 1' in solid rock (ignoring any advantage of topsoil above the
and run them out 100' (to equal your 700') I get a ground resistance of
about 8 ohms... as good as 20 rods 8' long by 1" diameter in good
still sounds like overkill to me. If I allow for 1' of topsoil on the
with the wires on the rock it goes down to under 6 ohms. To put that
perspective, the 'normal' 2 rods in loam calculates out to over 70 ohms,
common clay that reduces to 35 ohms.
David Robbins K1TTT
AR-Cluster node: 145.69MHz or telnet://k1ttt.net
TowerTalk mailing list