Re: [TowerTalk] hardline bending radius

[K7LXC@aol.com]

>  Does anyone have a good idea of minimum bending radius for  the 1/2 inch 
cable TV hardline? I have been told anything from 5" to 50". I  believe 5" 
is way  too sharp but 50"??? I sure that 50" would not cause any  problems 
with the cable but ...
 
    I recollect that the minimum bending radius for all  coaxes is 6 times 
the diameter. For 1/2" RG-8, that'd be 3 inches.
 
Cheers,
Steve    K7LXC
TOWER TECH 
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk