[Top] [All Lists]

Re: [TowerTalk] connecting more than one stubs

Subject: Re: [TowerTalk] connecting more than one stubs
From: Jim Lux <>
Date: Wed, 21 Nov 2012 06:00:17 -0800
List-post: <">>
On 11/21/12 5:20 AM, Kostas SV1DPI wrote:
David tnx for quick reply. Ok with the switch and i can trim the stubs
for the switch's length but can i connect more than one stub in one
T-connector? To make that clear i have a switch with 4 positions. Can i
switch at position 1 for 10m and have there both 23' and 11' stub
connected? That would be perfect but i  am not sure if it is ok...

sure you can do that, the feedline doesn't know the difference between a switch and a T connector.

If you had a switch like the RCS-8V, you could have 5 stubs and switch them in and out in any combination, as well.


TowerTalk mailing list

<Prev in Thread] Current Thread [Next in Thread>