Towertalk
[Top] [All Lists]

[TowerTalk] Fw: 80M Ideas

To: "towertalk@contesting.com" <towertalk@contesting.com>
Subject: [TowerTalk] Fw: 80M Ideas
From: "Paul GW8IZR" <paul_group@greenrover.demon.co.uk>
Reply-to: paul_group@greenrover.demon.co.uk
Date: Fri, 28 Dec 2012 21:47:22 +0000
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>

The Versatower is a crank up tower , there are no flanges bolted together.

--
Paul Higginson GW8IZR IO73TI
http://www.greenrover.demon.Co.uk

------- Original message -------
From: Jim Brown <jim@audiosystemsgroup.com>
To: towertalk@contesting.com
Sent: 28.12.'12,  21:35

On 12/28/2012 5:45 AM, Cqtestk4xs@aol.com wrote:
One can not assume low resistance at tower joints if they have been
painted.

Good point, Bill. OTOH, it depends on HOW they are painted. My towers are painted, but I carefully did not paint the tips of each section, so it does make good connections.

73, Jim K9YC
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>