Towertalk
[Top] [All Lists]

Re: [TowerTalk] Triex WT51

To: "Kathy Bookmiller" <wb2aio@yahoo.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Triex WT51
From: "Andre VanWyk" <kr5dx@yahoo.com>
Reply-to: Andre VanWyk <kr5dx@yahoo.com>
Date: Sun, 21 Apr 2013 12:14:00 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Kathy,

How much clearance do you have behind the tower? (Opposite side of where it will hinge to).

If you can borrow a Hy-Gain raising fixture to lower it, you are set if you have clearance behind it. You use a earth screw in anchor to keep the gin pole in position and it simply sits on the side of the concrete base.

I built a raising fixture myself and help lowered many towers this way.

Get with me off list if you know someone what will be willing to weld one up for you. Very simple to build if you have access to a welding shop.

73
NJ0F

--------------------------------------------------
From: "Kathy Bookmiller" <wb2aio@yahoo.com>
Sent: Sunday, April 21, 2013 11:06 AM
To: <towertalk@contesting.com>
Subject: [TowerTalk] Triex WT51

Hello TTérs,

I was at an estate sale yesterday. Went there actually to look at the amp. advertised. Was gone but noticed a ham-m control box so took a look to see what it was for. Found a nice WT51 out back. Looks in excellent condition and not very old judging from lack of rust and the concrete base still looked pretty 'white'. On top is what I believe is a 4el Mosley tri-bander. Did they make a TA34?? Never had a Mosley antenna, always Hygain or Telrex in the past.

Anyway, my problem is how to lower it. I'd put a ladder up to the top to remove the antenna/rotator but how to lower the actual tower over is the question. Didn't see anything I could attach a block and tackle to. I see from the current site, the tower weighs 360 pounds. Now I am a member of the local DX club, but like most clubs today, it is full of old men and couple of us slowly aging woman.

So I'm asking, how many folks do you think I would need to walk the tower over? Or any other ideas such as letting it fall onto something soft and crush able like a bunch of cardboard boxes? Ideas?
73,
Kathy, W2NK
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>