Towertalk
[Top] [All Lists]

Re: [TowerTalk] Insulator options for 160m vertical

To: "'Andre VanWyk'" <kr5dx@yahoo.com>, <towertalk@contesting.com>
Subject: Re: [TowerTalk] Insulator options for 160m vertical
From: "Gary \"Joe\" Mayfield" <gary_mayfield@hotmail.com>
Date: Fri, 31 May 2013 06:50:45 -0500
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
Several folks have these:
http://www.wb0w.com/tower_insulators

I do not, but I have dealt with wb0w, and always gotten a square deal.

73,
Joe kk0sd

-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Andre
VanWyk
Sent: Thursday, May 30, 2013 6:56 PM
To: towertalk@contesting.com
Subject: [TowerTalk] Insulator options for 160m vertical

I am planning a 160m vertical with elevated radials, using Rohn 25G tower
sections.  I plan to have the tower insulated at 30' above ground.

Rohn is very proud of their 25TG insulated section and I have heartburn
paying over $2K for the section, so I am looking for alternatives to
insulate this tower. There will be 130' of tower above the insulated part.

Someone recommended using fiberglass rod machined down to fit inside the 3
legs and I am currently investigating this option.

Any other ideas / comments / recommendations would be greatly appreciated.

73's
NJ0F
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>