Towertalk
[Top] [All Lists]

[TowerTalk] static and Anderson PP

To: towertalk@contesting.com
Subject: [TowerTalk] static and Anderson PP
From: foxbw@comcast.net
Date: Sun, 7 Jul 2013 15:47:10 +0000 (UTC)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>


I spent 15 months in VO2-land with the USAF in the late 60s.  At our VHF / UHF 
ground-to-air transmitter site, we had 16 antennas atop 60 foot utility poles.  
The coax entered the building then ran over the rungs of a horizontally 
suspended grounded aluminum ladder behind the transmitter racks, the coax then 
going down to its respective TX.  If you were in that building with the lights 
out, the wind blowing and dry snow flying, there was a veritable lightning show 
on that ladder as the arcs flashed through the coax to the ladder.  As a 
result, the outside plant maintenance guys had to replace the coax often.  



BTW, I live just over a mile from the Anderson Power Pole factory.  Guess what 
all our local club members use for their DC connectors?  ;>) 



Barry - W1HFN 

ex - VO2HA op 

_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
<Prev in Thread] Current Thread [Next in Thread>
  • [TowerTalk] static and Anderson PP, foxbw <=