proper knots like pipe hitches won't slip off. or you could put a clamp on the
pipe where you want it to stop going into the tower and use that as an anchor
for the rope or sling. that has the advantage of not letting the mast go too
far into the tower.
Nov 7, 2013 01:20:59 PM, rob.katz@thelegacycenter.com wrote:
I'm going to be installing a 20' heavy steel mast in my tower (a Trylon 72'
self-supporting tower). I will be renting a crane to lift the mast and drop it
from above. What kind of rigging do I use on the mast so it can be lifted up
vertically, without the sling slipping up off the top of the mast?
Thanks and 73,
Rob K4OV
--
Rob Katz, Director
Legacy Center, Inc.
919-678-6000
rob.katz@theLegacyCenter.com
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|