>From ZF2, I used ground radials buried in the sand. I see no reason to make
a connection to the water. The real advantage is from the salt water
filling out the pseudo-brewster angle.
John KK9A
To:TowerTalk <towertalk@contesting.com>
Subject:[TowerTalk] Saltwater Ground Connection
From:"Joe Giacobello, K2XX" <k2xx@swva.net>
Reply-to:k2xx@swva.net
Date:Mon, 27 Jan 2014 15:40:58 -0500
List-post:<towertalk@contesting.com">mailto:towertalk@contesting.com>
I'll be vacationing on a saltwater beach and will have a chance to to set up
a portable vertical antenna. Operation will probably be on 40, 30 and 20M. I
have a vague recollection of reading of others' experiences on saltwater and
believe that they typically used a single wire ground connection to the
saltwater. I believe the wire had a flat metal plate or similar attached to
the saltwater end to increase both conductive surface area and stability in
the water. Does that seem about right? I've also thought about using a
galvanized bucket at the end. Even if it only lasts for the duration of my
stay, it's cheap enough.
I'd appreciate hearing of any relevant experiences or opinions.
Thanks and 73,
Joe
K2XX
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|