That pin feeds the 'slow down before you hit the stop' circuit. The limit
switches activate before you get to the mechanical stops and reduce the
speed automatically so you don't hit the stops a full speed.
David Robbins K1TTT
e-mail: mailto:k1ttt@arrl.net
web: http://wiki.k1ttt.net
AR-Cluster node: 145.69MHz or telnet://k1ttt.net
-----Original Message-----
From: TowerTalk [mailto:towertalk-bounces@contesting.com] On Behalf Of Mike
Sent: Friday, March 21, 2014 21:07
To: towertalk@contesting.com
Subject: [TowerTalk] Yaesu G-2800
Can someone explain the functionality/use of the #6 pin on the
rotor/controller? The manual shows diode steered N.O. "limit switches" to
the motor windings in addition to the "normal" limit switches for the DC
motor.
Mike, K4EAR
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|