In response to the original Yaesu rotor controller Cinch Jones type
plug/socket where one blade is turned 90 degrees, Yeasu had these specially
made. There are no replacements or substitutes.
Once Yaesu stopped support, these connectors disappeared.
The best is to look at a Cinch Jones catalog and find a suitable connector
that fits in the opening of the controller.
This however, requires rewiring the cable and controller of course, but you
will have a connector that will work and can be readily replaced in the
future.
GL Tom W3FRG
_______________________________________________
_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
|