Towertalk
[Top] [All Lists]
<prev [Date] next>
[Advanced]
 <prev [Thread] next>

Re: [TowerTalk] Sluggish crank-up tower

from [Richard (Rick) Karlquist] [Permanent Link][Original]
To: Rick Stealey <rstealey@hotmail.com>, "towertalk@contesting.com" <towertalk@contesting.com>
Subject: Re: [TowerTalk] Sluggish crank-up tower
From: "Richard (Rick) Karlquist" <richard@karlquist.com>
Date: Fri, 20 Jun 2014 15:09:38 -0700
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com> 
On 6/20/2014 9:10 AM, Rick Stealey wrote:


Ok, so my next theory is a pulley is jammed,
Rick  K2XT
                                        


The pulley bearings do freeze up regardless of
anything the mfr. says.  Spray with WD40 until
you can spin them by hand then apply lubricating
oil.  Inspect all pulley's as part of a general
refurbishing.

Rick N6RK
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk
[More with this subject...]
<Prev in Thread] Current Thread [Next in Thread>
Previous by Date:  Re: [TowerTalk] 10 throu 20 beam traps or no traps, n0tt1
Next by Date:  [TowerTalk] FW: Sluggish crank-up tower, Matt
Previous by Thread:  Re: [TowerTalk] Sluggish crank-up tower, Grant Saviers
Next by Thread:  [TowerTalk] FW: Sluggish crank-up tower, Matt
Indexes:  [Date] [Thread] [Top] [All Lists]