Towertalk
[Top] [All Lists]

Re: [TowerTalk] Recommendations for Purchasing a short 2 Element 40 Mete

To: TowerTalk <TowerTalk@contesting.com>
Subject: Re: [TowerTalk] Recommendations for Purchasing a short 2 Element 40 Meter Beam
From: "L L bahr " <pulsarxp@embarqmail.com>
Date: Fri, 1 Aug 2014 13:52:42 -0400 (EDT)
List-post: <towertalk@contesting.com">mailto:towertalk@contesting.com>
I started this discussion, and am frankly overwhelmed by the quantity and 
quality of the suggestions and discussion given on this subject.  Again, I'd 
like to thank everyone for your views. They were most helpful. I now have 
decided to build a heavy duty version of the W6NL Moxon.  Since you guys took 
the time to write me your recommendations,  I'd like to take the time to tell 
you rightfully or wrongly why I decided on the above decision based on your 
input:

1. The design gives a lot of Bang for the size and cost.  (W6NL Heavy Duty 
Version 2 element 40 Meter Moxon)

2. I live in a subdivision with Deed Restrictions and even though I got 
approval for my antenna,  I think stacked antennas would be "pushing it".

3. There are a lot of plans on the internet on how to build this antenna and I 
don't have to re-invent the wheel.

4. I live near Houston, Texas and there are a lot of aluminum venders in the 
area and/or I can order some nice beefy aluminum from a few internet sources at 
good prices.

5.  I did some cost calculations and I believe I can build this antenna for 
around $700.00 using first class components including cast aluminum boom clamps 
and SS hardware.  (I now know there are some terrific antennas available but 
they will cost me $1600 to $1700 dollars.)

6. Some have pointed out to me there is little difference in time building this 
antenna from scratch compared to modifying a new Cushcraft XM240.  Building it 
from scratch will cost less then modifying a new Cushcraft XM240.  I'll also 
have better components in my homemade version and won't have to throw away some 
new parts from the kit.

7.  I plan to run some high power AM from time to time and coils and linear 
loading trouble me.  (Been there done that with my old 402BA)

8.  My requirements don't allow a full sized beam and this antenna will be up 
only 50 foot so the best antenna installation is not in the cards.

So there you have it.  Rightfully or wrongly I have decided to build from 
scratch a heavy duty W6NL 2 element 40 Meter Moxon. All your input brought me 
to this conclusion.  A few days ago I had limited knowledge on what I needed to 
buy, you guys changed all that.

Thanks all,

Lee, w0vt   
_______________________________________________



_______________________________________________
TowerTalk mailing list
TowerTalk@contesting.com
http://lists.contesting.com/mailman/listinfo/towertalk

<Prev in Thread] Current Thread [Next in Thread>